Our 6FT 10″ Verge Flail mower is suitable for short or long thick grass, mulching up vines in the vineyard through to heavy undergrowth mulching sticks and debris.
It can operate at a vertical incline of up to 90 degrees for cutting/mulching up slopes and banks. You can even trim hedges with it! It can also operate to minus 65 degrees meaning it’s great for down banks and culverts too.
This unit has multiple uses as the hydraulic head can operate horizontally for inline or off set for verge or open paddocks.
With a large rear roller this will help the machine follow the ground contours.
This unit is PTO driven through a 50Hp gearbox coupled with a 6″ slip Clutch for maximum protection and a Heavy Duty PTO shaft. Our unit is fitted with Heavy Duty Forged Hammer Blades with Precise blade overlap. The blades can also swing back in either direction making them extremely durable when hitting solid objects. Because the blades rotate vertically compared to a horizontal mower or slasher it will give a better cut. Fitted on the 3 Point Linkage Frame are 2 support legs for easy connection and storage as well as Pto shaft holder.
This unit requires 2 sets of Hydraulic Remotes, one set to operate vertical ram and also one set to operate Horizontal ram. Suitable for tractors 50-110Hp.
- Model DDBCR200
- 2000mm Cut
- 28 Heavy Duty Forged Hammer Blades
- Spiral Blade Shaft To Give Maximum Efficiency And Less Horsepower Required To Run Machine
- Overall Width 2450mm
- Unit Weight 680Kg
- Shipping Weight 730Kg
- 50Hp Gearbox
- Four Drive Belts On Side Of Unit From Gearbox
- 6″ Slip Clutch
- T5-1800 Pto Shaft With Pto Holder
- Hydraulic Rams Fitted With Hydraulic Hoses
- Require 2 Sets Of Remotes (4)
- 4mm Deck, 6mm Sides
- HD One Piece 3 Point Linkage Frame
- Open Rear Discharge Hood For Fasting Cutting In Heavy Growth/Scrub
- SKF Bearings
- Grease Nipples On All Bearings
- Front Stone Guards
- Cat 2 Pins
- Pto Speed 540Rpm
- 8″ 200mm Rear Roller
- Adjustable Skids
- Overall Length 1200mm
- Overall Height 2450mm
- Blue And Black Powder Coated Finish
- 12 Month Parts Warranty
- Suitable For Tractors 60-110Hp
- Assembly Required (Approx 2 Hours) Contact Us For Assembly Details
|Dimensions||223 × 102 × 90 cm|